Natural bee’s wax in an aqueous dispersion, ready to use and ideal for the protection and preservation of finishes like Lucidato, Metallic Stuccos, and Marmorinos.
With all liquid products we recommend the use of safety eyewear and gloves.
Composition:
Bees wax, pure Marseille soap, pearlescent pigments and special additives.
Yield:
1lt x 1 or 2 coats 15 to 25 m2 depending on surface texture.
Application:
• Application with sponge, pads, lint free cloth or paintbrush, depending on surface.
•Ready to use, stir with care.
• Let plaster surface dry for at least 24 hours before application
• Apply the wax using a sponge in area size of about 1 m2 per time, until the surface no longer absorbs the wax. Remove the excess of wax from surface with a cloth.
• After about 30 min, and not more than 2 hours, proceed to polishing with clean lint free cloths or mechanical polishing machine with wool pads.
Storage:
Store in dry place with temperatures from a minimum of 5° to 30°C max.
Safety & First Aid Measures:
This product is not classified as hazardous according to the provisions of regulation (EC) 1272/2008 (CLP).
Always wear personal protective equipment to prevent any accidents.
First Aid Measures:
EYES: Wash immediately and thoroughly with warm water and if further irritation occurs, consult a doctor.
SKIN: Wash with plenty of water and soap.
INGESTION: Do not induce vomiting. Seek Medical attention immediately.
In case of fire, use water or CO2 extinguisher.
Typically all orders are shipped out with APC next day service except weekends.
